During installation

For flat drip lines and tapes – drippers face up.

Always ensure that when you install, the drip emitters face up.

Sediment will build in the tube over time. This sediment falls to the bottom of the tube. If the dripper is on the bottom of the tube, it will enter the emitter, greatly increasing your clogging risk.

The above applies for flat drippers and tapes. It is not required for round drip lines that have 2 x outlets on opposing sides.


Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.