Step 2 – Calibration

The system is now flushed, so now you need to calibrate the valves.

1. Adjust all valves throughout the system. Start at the pump and work towards the end of the system. At each point, adjust the valves to match the pressure indicated on the design.



2. Close the laterals or, if using a flushing manifold, close the valves of the flushing manifold.



Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.