Pressure gauge locations

  • Pressure gauges, or ports for a pressure gauge, should be installed on the mainline both before and after the filters.

  • The pressure gauge/port after the filters should be located near the mainline flow meter.

  • It is beneficial to install a pressure gauge/port at each submain riser (field control).

  • One pressure gauge with a selector valve can be used to measure the pressure at multilple points (e.g. before and after a filter).



Explore the next module, or search for a specific topic or issue.

Before using these modules, please familiarize yourself with the relevant disclaimers and additional safety and usage information contained within each module.

© 2023, Rivulis Irrigation Ltd, all rights reserved. 
Reproduction of this content in any form is prohibited without the written consent of Rivulis Irrigation Ltd.